Printer-friendly

Bypass Leak Indicator

Bypass Leak Indicator
Bypass-Panel

With Hundreds of Places to Leak...
How Can You Be Sure?

Leaks can occur 24 hours a day / seven days a week. That means a small leak of one-half cubic foot an hour wastes more gas each day than you would use to dispense two kegs of beer. The McDantim Bypass Leak Indicator shows you in seconds if you have a leak, gauge how big that leak is and know when it’s fixed.

Continue Reading

MV035 – In-Line Leak Indicator

In-Line Leak Indicator

Think you are using too much gas or your nitrogen generator is working to hard? Install the In-Line Leak Indicator as part of your draft beer system and you can easily determine the size of your gas leak. Know when the leak requires immediate attention or is hazardous to your employees.

NOTE: MV039 not pictured.

Continue Reading

Tee with Check Valve

Tee with Check Valve

MV013 - 1/4” x 1/4” x 1/4”
MV042 - 3/8” x 3/8” x 3/8”
MV044 - 1/4” x 1/4” x 3/8”
MV045 - 1/4” x 3/8” x 3/8”

Note: middle dimension to the Soda Carbonator

Protects Blender from being filled with water when the Blender is being using in conjunction with a Soda Carbonator.

Our Trumix® Blender warranty only covers against water damage if a Tee was installed.

Use with braided high pressure hose.

MV020 Beer Check with Adaptor and MV022 Beer Check with Adaptor & Leak Sensor

Beer Check with Adaptor
and (optional) Leak Sensor

This revolutionary gas analyzer, manufactured by O2 Technologies, is a hand-held gas analyzer that accurately measures several combinations of gases and offers an optional Leak Sensor.

The Beer Check can analyze:

  • CO2 in N2 - Use to check mixed gas blends used in brewing and dispense.
  • CO2 in Air - Use for Brewers who purge kegs and tanks with CO2.
  • O2 in N2 - Use to check nitrogen generators and for purging kegs or tanks with nitrogen.
  • Leak Sensor - The Beer Check is the only electronic Leak Sensor we have heard of that detects nitrogen leaks. In 12 years of working with analyzers, we have never seen anything like it.

An adaptor by McDantim fits a standard 7/8-14 beer nut (same as keg coupler) is included with the MV020 and MV022 packages.

Continue Reading