shopping_cart

Trumix® Single High Flow

Product Images

Trumix® Single High Flow

Description

Our Trumix® blenders mix CO2 and N2 on demand and are best used for long draw draft systems. The Trumix® Single High Flow HPR blender comes preset with your custom blend to best fit your system. The panel mounts easily on the wall, and is simple to install. With the Trumix® Single High Flow HPR blender, you will get nearly double the flow rate of a standard Trumix® Single blender at the same inlet pressure. This blender is utilized in systems where a higher flow rate is required, or higher inlet pressures, like 70 psi or 110 psi, are not feasible.


Not sure of which blends you need? Download the McDantim EasyBlend app, available on Android and iOS.


Features:

  • Does not operate if either supply gas fails or becomes empty.

  • Easy installation.

  • No electrical set-up required.

  • 5 Year Limited Warranty.

  • Custom Blends: Each blender is built to order to suit your needs.

  • Optional Plug & Play In-Line Leak Indicator Package


WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or reproductive harm. For more information, go to www.P65Warnings.ca.gov
This 

Specifications

  • Size: 9.5" wide (including mounting flanges) x 10" high x 4.5" deep.

  • Connections: Two Inlet Gas Lines (CO2 & N2), Mixed Gas Outlet Line per blend.

  • Fittings: Panel comes with standard 1/4" female NPT fittings. Installed hose barbs available at no additional cost. Specify size: 1/4", 5/16", and 3/8".

  • Accuracy and Flow Range: Maintains accuracy of +/- 2% of full scale or better within the flow range of .4 to 40 liters per minute (.85 to 85 cubic feet per hour).

  • Standard Flow Capacity: 
    • At 55 psi minimum inlet pressure, up to 20 kegs/hour per blend. 
    • At 70 psi minimum inlet pressure, up to 26 kegs/hour per blend. 
    • At 110 psi minimum inlet pressure, up to 48 kegs/hour per blend.
  • Inlet Pressures: Blender tuned in house with minimum required inlet pressure. Standard pressures are 55 and 70 psi, but can be customized for your system. Maximum inlet working pressure of 150 psi. Includes upgraded metal body Inlet Regulators with a maximum safe pressure up to 325 psi.

  • Outlet Pressures: Adjustable outlet pressure of 0-60 psi per blend. The maximum outlet pressure will always be 10 psi lower than the minimum inlet pressure.