Printer-friendly

The McDantim Trumix® Blending Panel was specifically designed to fill the needs of the U.S. Beer Dispensing Market. The Panel is a small wall-mounted unit that tucks neatly and safely out of the way. It is easy to install and is extremely dependable. The Trumix® requires no electricity, on-going maintenance or adjustment. It can be used equally well with all sources of clean nitrogen and CO2 including high pressure cylinders, bulk tanks or separators.

Trumix® Single & Single High Flow Specifications

Trumix® Single (TM-1)

Used for single blend long draw beer systems. Best for dispensing one style of beer. Blends CO2 and N2 to your specifications.

  • Size: 9.5" wide (including mounting flanges x 10" high x 4.5" deep
  • Hook-Up: Two inlet lines and one outlet line.
  • Fittings: Panel comes with standard 1/4" female NPT fittings. Hose barbs available at no additional costs. Specify size: 1/4", 5/16", and 3/8".
  • Accuracy and Flow Range: Maintains accuracy of +/- 2% of full scale or better within the flow range of .4 to 40 liters per minute (.85 to 85 cubic feet per hour).
  • Standard Blender: Up to 15 kegs/hr. dispensed.
  • High Flow Blender: Up to 30 kegs/hr. dispensed. Used for systems requiring only one blend of C02 and N2 that operate with higher than usual gas flow.
  • Inlet Pressures: 55-150 psi, however, panel can be set to match any conditions. Blender tuned at inlet pressure of existing system. Standard 55 and 70 psi.
  • Outlet Pressures: Adjustable outlet pressures of 0-60 psi. The maximum outlet pressure will always be 10 psi lower than the lowest inlet pressure. The panel can also be ordered with outlet pressure set to custom ranges.

Trumix® Double & Double High Flow Specifications

Trumix® Double (TM-2)

Used for systems that dispense more than one type of beer requiring two separate blends of CO2 and N2.

  • Size: 9.5" wide (including mounting flanges x 10" high x 4.5" deep
  • Hook-Up: Two inlet lines and two outlet lines.
  • Fittings: Panel comes with standard 1/4" female NPT fittings. Hose barbs available at no additional costs. Specify size: 1/4", 5/16", and 3/8".
  • Accuracy and Flow Range: Maintains accuracy of +/- 2% of full scale or better within the flow range of .4 to 40 liters per minute (.85 to 85 cubic feet per hour).
  • Standard Flow: Up to 30 kegs/hr. (15 kegs/hr. per blend) dispensed.
  • High Flow Blender: Up to 60 kegs/hr.(30 kegs/hr. per blend) dispensed. Used for systems requiring two blends of C02 and N2 that operate with higher than usual gas flow.
  • Inlet Pressures: 55-150 psi, however, panel can be set to match any conditions. Blender tuned at inlet pressure of existing system. Standard 55 and 70 psi.
  • Outlet Pressures: Adjustable outlet pressures of 0-60 psi. The maximum outlet pressure will always be 10 psi lower than the lowest inlet pressure. The panel can also be ordered with outlet pressure set to custom ranges..

Trumix® Triple Specifications

Trumix® Single (TM-3)

Used for triple blend long draw beer systems. Best for dispensing several varieties of beer. Blends CO2 and N2 to your specifications.

  • Size: 9.5" wide (including mounting flanges x 10" high x 4.5" deep
  • Hook-Up: Two inlet lines and three outlet lines.
  • Fittings: Panel comes with standard 1/4" female NPT fittings. Hose barbs available at no additional costs. Specify size: 1/4", 5/16", and 3/8".
  • Accuracy and Flow Range: Maintains accuracy of +/- 2% of full scale or better within the flow range of .4 to 40 liters per minute (.85 to 85 cubic feet per hour).
  • Standard Blender: Up to 30 kegs per hour dispensed.
  • Inlet Pressures: 55 psi, only.
  • Outlet Pressures: 47 psi, you will need to have secondary regulators before the keg.